This water pump and thermostat assembly, referenced as 06H121026, is a combined cooling system replacement for Audi A3, A4, A5, and Volkswagen CC, Tiguan, and GTI 1.8T and 2.0T engines, circulating coolant and regulating operating temperature in one unit.
This water pump and thermostat assembly replaces the combined coolant pump and thermostat housing on Audi A3, A4, A5, and VW CC, Tiguan, and GTI 1.8T and 2.0T engines. The water pump keeps coolant moving through the block, head, and radiator while the integrated thermostat controls when coolant flows to regulate temperature. It is aimed at owners and shops handling a failed pump, a stuck thermostat, or a proactive cooling system refresh.
| Part Number(s) | 06H121026 |
| Part Type | Water Pump and Thermostat Assembly |
| Engine Fitment | 1.8T and 2.0T |
| Components | Pump, Thermostat, Housing |
Q: Do I need to replace the coolant after installing this assembly? A: Yes, the cooling system must be drained and refilled with the correct coolant for your engine, then bled to remove air pockets. Reusing old coolant or skipping the bleed step can cause overheating.
Q: Can I install this water pump and thermostat without removing the timing belt? A: On many 1.8T and 2.0T engines the pump sits behind the timing belt, so the belt often has to come off. If the belt is due for service, replacing both at the same time saves labor.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.