The T-Map Sensor is a combination intake air temperature and manifold absolute pressure sensor that reports load data to the engine control unit on fuel injected machines, and it is a direct replacement cross-referenced to 2410422 and 2411528.
This T-Map sensor is a plug-in replacement for the combined temperature and pressure sensor used on many Polaris EFI engines. The T-Map sensor feeds manifold pressure and intake air temperature signals to the ECU so fueling and timing stay accurate across the rev range. It is aimed at riders and mechanics servicing fuel injected side-by-sides and ATVs.
| Part Number(s) | 2410422, 2411528 |
| Sensor Type | Combined T-Map (MAP and IAT) |
| Fitment Type | Direct replacement |
Q: Will this sensor need calibration after installation? A: No, it is a drop-in replacement for the stock T-Map sensor and the ECU reads it the same way. Clear any stored codes after fitting and take a short ride to confirm normal operation.
Q: How do I know the T-Map sensor is the fault and not the wiring? A: Rough running, poor idle, or MAP and IAT related codes are common signs, but inspect the connector and harness for damage first. If wiring is sound, replacing the sensor is the standard next step.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.