This water pump impeller repair and rebuild kit, part number 5001594, restores cooling water flow on 85 to 300 HP Johnson Evinrude outboards by replacing the worn impeller and related pump components.
This water pump impeller repair kit provides the key components needed to rebuild the cooling pump on 85 to 300 HP Johnson Evinrude outboards. The impeller repair kit restores water flow to the powerhead so the engine stays at safe operating temperature. It suits boat owners and marine mechanics performing routine impeller service or fixing an overheating outboard.
| Part Number(s) | 5001594 |
| Kit Type | Water pump impeller repair and rebuild kit |
| Horsepower Range | 85 to 300 HP |
| Application | Johnson Evinrude outboards |
Q: How often should a water pump impeller be replaced? A: Most outboard makers suggest impeller service every few seasons or at set engine hour intervals, whichever comes first. Sandy or silty water shortens that interval.
Q: Can I install this kit without pulling the lower unit? A: No, the water pump sits above the lower unit, so the gearcase must be dropped to reach the impeller housing. A service manual for your model walks through the steps.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.