This turbocharger compressor CHRA core is a drop-in rotating assembly for the 4.0L twin-turbo engine, restoring boost pressure and throttle response on the S6, S7, A8, and S8. It replaces a failed center housing rotating assembly to bring the turbocharger back to working condition.
This turbocharger compressor CHRA core fits the 4.0L V8 used in the S6, S7, A8, and S8. The cartridge holds the compressor wheel, turbine wheel, and bearing housing in one balanced unit, so a worn or smoking turbo can be rebuilt without replacing the whole assembly. It is intended for owners and shops handling turbo repair on these models.
| Part Type | Turbocharger CHRA Core |
| Engine | 4.0L V8 |
| Engine Codes | CEUC, CEUA |
| Quantity | 2 Pieces |
Q: Do I need to rebalance the assembly after installation? A: The cartridge comes as a balanced unit, but many shops still verify balance and clearances during a rebuild. Follow your service manual for the exact procedure.
Q: Can I install this without removing the whole turbo? A: The CHRA is typically fitted with the turbo off the vehicle and the housings separated. Installing it on the bench is the standard method.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.