These steel leaf spring degree shims adjust the rear pinion angle of leaf-sprung vehicles to correct driveline vibrations.
These steel leaf spring degree shims adjust axle alignment to eliminate vibrations caused by suspension lifts or drops. They correct the drive shaft angle by tilting the axle housing relative to the leaf spring pack. Off-road builders and suspension mechanics use these steel leaf spring degree shims to restore proper geometry after altering ride height.
| Width | 2 inches |
| Angle | 4 Degrees |
| Material | Steel |
| Quantity | 2 Pieces |
| Color | Silver |
Q: Are longer center pins required to install these shims? A: Yes, since these shims add thickness, the spring center pin must be long enough to pass through the shim.
Q: Which way should the thick end of the shim face? A: The direction depends on whether the pinion needs to be raised or lowered; consult drive shaft angle measurements to decide.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.