This 1.6 ratio roller rocker arms kit is built for Chevy small block 327, 350, and 400 engines, using stainless steel rockers and a 3/8 inch stud mounting to reduce friction in the valvetrain.
This roller rocker arms kit is made for Chevy small block 327, 350, and 400 engines and uses a 1.6 ratio with a 3/8 inch stud base. The roller tip and trunnion design cuts friction and side loading compared with stock stamped rockers. It suits engine builders and racers working on a small block Chevy valvetrain.
| Rocker Ratio | 1.6 |
| Stud Size | 3/8 inch |
| Material | Stainless steel |
| Engine Family | Chevy small block 327, 350, 400 |
| Type | Roller rocker arms kit |
Q: Do I need to check pushrod length with these rockers? A: Yes, a 1.6 ratio roller rocker can change the geometry enough that pushrod length should be verified. Check clearance at the retainer and guide before running the engine.
Q: Will these work with a stock valve cover? A: Roller rocker bodies are often taller than stamped stock rockers, so internal baffle clearance should be checked. Some builds need a taller or modified valve cover.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.