This Door Hinge Pin Removal Tool (OEM cross-reference 9020902, 9020902-01) extracts worn hinge pins quickly and cleanly. It is designed for the GMC Envoy 2002-2009, letting you service doors without damage to surrounding sheet metal. The tool applies controlled force to drive out seized hinge pins, making door removal and replacement straightforward.
The Door Hinge Pin Removal Tool for GMC Envoy is a dedicated service tool that pushes out hinge pins from door hinges with a threaded driver and receiver cup. It works on the GMC Envoy 2002-2009, replacing the need for hammering and pry bars. The tool converts twisting force into linear pressure, so pins come out straight and fast.
| Part Number(s) | 9020902, 9020902-01 |
| Tool Type | Hinge pin removal driver |
| Operation | Manual with ratchet or breaker bar |
| Material | Forged steel |
Q: Will this tool work with any hinge pin size?A: The driver and receiver are sized for factory hinge pins on the 2002-2009 GMC Envoy. For aftermarket or oversized pins, measure the pin diameter first to ensure a match.
Q: Can I use an impact wrench with this tool?A: While a ratchet is recommended, an impact wrench can be used at low settings. Avoid high torque to prevent damaging the receiver or the hinge bracket.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.