This cathedral port single plane intake manifold for GM LS1 and LS2 engines is designed to support high-rpm airflow in the 3,500 to 8,000 RPM range.
This cathedral port single plane intake manifold for GM LS1 and LS2 engines routes air from the throttle body into the cylinder heads with a short, direct runner design aimed at upper-rpm power. The single plane layout favors sustained high-rpm breathing between 3,500 and 8,000 RPM, making it a fit for builds that spend time in the upper rev range. It suits engine builders and racers working with cathedral port LS heads who want a manifold matched to a performance cam and higher stall or manual transmission.
| Type | Single plane intake manifold |
| Port Style | Cathedral port |
| Engine Fitment | GM LS1, LS2 |
| RPM Range | 3,500 to 8,000 |
Q: Will this manifold work with a stock throttle body and fuel rail? A: Throttle body and fuel rail compatibility depends on the specific accessory drive and injector setup, so verify mounting patterns and heights before ordering. Many builds pair a single plane like this with an aftermarket cable-driven throttle body.
Q: Does a single plane manifold hurt low-rpm torque? A: A single plane trades some low-rpm torque for stronger upper-rpm breathing, so it works best with a cam and gearing matched to the 3,500 to 8,000 RPM range. Confirm the combination with your engine builder.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.