These A-Arms 1.5″ High Clearance Forward Offset for Can-Am Commander 1000R 2021-2026 replace the factory control arms to provide increased ground clearance and improved suspension geometry. Designed for the Can-Am Commander 1000R, these A-Arms allow for a forward offset that enhances stability and tire clearance. This set of A-Arms is built for riders who demand maximum performance from their UTV.
These A-Arms 1.5″ High Clearance Forward Offset for Can-Am Commander 1000R 2021-2026 are a direct-fit suspension upgrade that increases ground clearance by 1.5 inches. The forward offset design moves the wheel position forward for better approach angles and reduced bump steer. These A-Arms are intended for off-road use on the Can-Am Commander 1000R.
| Material | DOM Steel |
| Finish | Powder Coat |
| Ride Height Increase | 1.5 Inches |
| Position | Front |
| Fitment | for Can-Am Commander 1000R 2021-2026 |
Q: Will these A-Arms fit my stock shocks? A: Yes, these A-Arms are designed to work with factory shocks and springs, though aftermarket shocks may be required to maximize the clearance benefit.
Q: Do these A-Arms require any modifications to install? A: Installation is a direct bolt-on replacement for the factory A-Arms, but professional installation is recommended to ensure proper alignment and torque specifications.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.