This 750ml 10AN oil catch can reservoir tank with breather filter and baffled kit is an aluminum oil separation can that captures blow-by vapor and keeps oil mist out of your intake tract. The baffled oil catch can reservoir tank works with 10AN fittings and includes a breather filter for vented setups, making it a practical addition for turbo, supercharged, or high-mileage engines.
This baffled oil catch can kit combines a 750ml aluminum reservoir tank, 10AN inlet and outlet ports, and a breather filter into one complete air-oil separation setup. The oil catch can reservoir tank traps oil vapor and condensation before they reach the intake, helping reduce carbon buildup and detonation risk. It suits drivers and builders running turbocharged, supercharged, or worn-ring engines who want cleaner intake air and less oil consumption.
| Capacity | 750ml |
| Fitting Size | 10AN |
| Material | Aluminum |
| Style | Baffled with breather filter |
| Included | Reservoir tank, breather filter, baffled kit |
Q: How often should I empty the catch can? A: Check the reservoir every few hundred miles and drain it when oil reaches about half full, more often on engines with heavy blow-by.
Q: Can I run this can on a stock PCV system? A: Yes, it can be plumbed inline with the PCV circuit, but the included breather filter is normally used on vented setups where no return line runs back to the intake.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.