This 3/8″ magnetic inline automatic transmission power steering filter, referencing OEM cross-reference 3810000, traps ferrous debris in the fluid line to protect pumps and valves. It is designed for trucks with 3/8″ return or cooler lines, and its magnetic core also captures fine metal particles that standard screens miss.
This 3/8″ magnetic inline automatic transmission power steering filter is a serviceable inline unit that installs directly into a 3/8″ hose. It filters transmission or power steering fluid continuously while the engine runs, and it is built for truck applications where automatic transmission or power steering system protection is critical. The 3810000 cross-reference ensures it matches common OEM filter specs.
| Inlet/Outlet | 3/8″ barb |
| Filtration | Magnetic plus stainless mesh screen |
| Flow Direction | Inline, bidirectional |
| Part Number(s) | 3810000 |
Q: How often should I clean this filter? A: Inspect it every 10,000 miles or during each transmission service. Clean the mesh and wipe the magnet when visible debris accumulates to maintain flow.
Q: Can this filter be used on both transmission and power steering lines? A: Yes, it works for either system as long as the hose is 3/8″ and the operating pressure stays within standard return line limits, typically under 100 psi.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.