These rear sway bar stabilizer end links connect the sway bar to the lower control arm or frame bracket on 2000-2020 Chevy, GMC, Cadillac, and Hummer trucks and SUVs, reducing body roll and restoring factory handling characteristics.
These rear sway bar stabilizer end links are direct-replacement linkage assemblies that transmit lateral force between the anti-roll bar and the suspension pickup point. Each rear sway bar stabilizer end link incorporates factory-style ball-and-socket or bushing-style joints to allow articulation without binding. Technicians order these rear sway bar stabilizer end links in pairs when clunking over bumps or wandering at highway speed points to worn link bushings or broken studs.
| Quantity | 2 pieces (left and right rear end links) |
| Stud Diameter | Commonly 10 mm or 12 mm depending on chassis |
| Finish | Zinc-plated or e-coated studs and body |
| Configuration | Stabilizer link with bushings, washers, and lock nuts |
Q: Do these end links fit both lifted and stock-height trucks? A: They match OE length for factory suspension geometry and may not accommodate lifts exceeding 2 inches without extended-link relocation brackets.
Q: Should the suspension be loaded when torquing the end link fasteners? A: Yes, the vehicle should rest on its wheels at ride height so the bushings are clocked without preload before final torque is applied.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.