This pair of ignition coils replaces OEM 592846 and 691060, delivering the spark needed to fire engines 446777, 446877, and 543477.
These ignition coils mount on the engine to step up voltage and feed the spark plug for reliable combustion. The set of two covers twin-cylinder configurations so both sides fire evenly. Owners of Briggs & Stratton small engines can use this ignition coil pair for routine tune-ups or a no-spark fix.
| Part Number(s) | 592846, 691060 |
| Quantity | 2 coils |
| Type | Ignition coil |
| Application | Briggs & Stratton 446777, 446877, 543477 |
Q: How do I test if the coil is bad? A: Check for spark at the plug with an inline tester; no spark with a known-good plug and clean grounds points to the coil. Ohm testing the primary and secondary windings can confirm before you buy.
Q: Do I need to set an air gap when installing? A: Yes, coil-to-flywheel air gap should be set to the engine spec, commonly around 0.010 inch, using a business card or feeler gauge. Confirm the gap before tightening the mounting bolts.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.