This -10AN AN10 flare fuel cell bulkhead fitting with Teflon washer passes fuel or fluid lines through a cell wall or panel with a sealed flare connection.
This -10AN AN10 flare fuel cell bulkhead fitting mounts through a tank or panel wall so a fuel line can pass through with a sealed connection. Supplied as a pair with Teflon washers, the AN10 bulkhead fitting gives builders a clean pass-through point for fuel cell and fluid line plumbing. It suits racers and fabricators setting up fuel systems on custom builds.
| Size | -10AN / AN10 |
| Type | Flare bulkhead fitting |
| Washer | Teflon |
| Quantity | 2 pieces |
| Material | Aluminum |
Q: What does the Teflon washer do? A: It seals the fitting against the mounting surface where the bulkhead passes through the wall. Replace it if it gets nicked or crushed during install.
Q: Can I use these on a fuel cell? A: Yes, they are made for fuel cell and panel pass-throughs with -10AN flare connections. Confirm your wall thickness and hose end size before ordering.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.