Level the front stance of your 2018-2023 Can-Am Defender with this 3-inch preload spacer kit that adds ground clearance while preserving factory shock preload settings, referencing Lone Star part number 97035.
This preload spacer kit lifts the front suspension of a Can-Am Defender to eliminate the factory rake and improve tire clearance for larger treads. The spacers install above the coil spring atop the shock assembly, stiffening the initial spring rate just enough to support added weight from a winch or plow. Riders tackling rough trails, muddy fields, and rocky terrain will gain extra skid plate clearance without changing shock length.
| Part Number(s) | 97035 |
| Lift Height | 3 in |
| Fitment | 2018-2023 Can-Am Defender |
Q: Will this spacer kit make the ride noticeably stiffer? A: The preload increase is modest and primarily offsets sag from added accessories; most operators find the ride remains compliant while reducing nose dive under braking.
Q: Can I install this without removing the shock assembly? A: The shock must be removed from the vehicle and partially compressed to slide the spacer over the shaft, so basic mechanical skills and spring compression caution are required.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.