This 16 pin radio ISO wire harness adapter pair connects an aftermarket ISO-style head unit to the factory wiring on many Peterbilt and Freightliner semi trucks, letting you install a new radio without cutting the original loom.
This 16 pin radio ISO wire harness adapter pair is built to link an ISO-pattern aftermarket radio to the existing factory connector on many Peterbilt and Freightliner semi trucks. The harness adapter pair carries power, ground, and speaker signals so the new head unit plugs into the truck side without splicing. It suits drivers, fleet techs, and installers swapping or repairing a radio in a working semi truck.
| Connector Type | 16 pin ISO |
| Quantity | Pair |
| Application | Radio harness adapter |
Q: Will this harness adapter fit my truck? A: Fit depends on the radio connector used in your specific Peterbilt or Freightliner model, so check the factory plug against the 16 pin ISO pattern before ordering.
Q: Do I need to cut factory wiring to use it? A: The adapter is designed to plug between the aftermarket radio and the factory connector, so no cutting of the original loom is normally required.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.