This SPI .040 over bore piston kit is a direct replacement for Polaris Indy 600, XCR, XLT, and Triumph 66mm engines, providing a 66mm piston with .040-inch oversize for rebuilding worn cylinders.
The SPI .040 over bore piston kit delivers a high-quality 66mm piston designed for Polaris snowmobile engines needing an overbore rebuild. This piston kit includes rings, wrist pin, and circlips for a complete top-end restoration on Polaris Indy 600, XCR, XLT, and Triumph models.
| Bore Size | .040 over (66mm) |
| Oversize | .040 in |
| Piston Diameter | 66mm |
| Compatible Brand | Polaris |
Q: Do I need to hone the cylinder before installing this piston kit? A: Yes, a cylinder hone is recommended to achieve proper ring seating and ensure the piston slides smoothly in the bore.
Q: What is the recommended ring gap for this .040 over piston? A: Ring gap should be measured and set according to the manufacturer’s specifications, typically between 0.010-0.020 inches for the top ring.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.