This set of GM LS7-style hydraulic roller lifters and lifter guide trays is made for Chevy and GMC LS/LQ 4.8L, 5.3L, 5.7L, 6.0L, and 6.2L engines, replacing worn or noisy lifters and keeping the valvetrain aligned under load.
These GM LS7 lifters and guide trays are a direct-fit valvetrain service set for Chevy and GMC LS/LQ 4.8L, 5.3L, 5.7L, 6.0L, and 6.2L engines. The lifters ride the cam lobes and transfer motion to the pushrods, while the guide trays hold each lifter squarely in its bore. This LS7 lifter and guide tray set suits rebuilds, cam swaps, and refreshes on high-mileage LS and LQ powerplants.
| Part Type | Hydraulic roller lifters with guide trays |
| Engine Family | LS and LQ V8 |
| Displacements | 4.8L, 5.3L, 5.7L, 6.0L, 6.2L |
| Lifter Style | LS7-style roller |
| Guide Tray Included | Yes |
| Part Number(s) | LS7 lifter and guide tray set |
Q: Do these lifters work with a stock LS camshaft? A: Yes, the hydraulic roller design suits stock and mild aftermarket LS cams, though you should check your cam manufacturer’s lifter recommendation before installing. Always measure preload and verify pushrod length after any lifter change.
Q: Are new guide trays required with new lifters? A: Reusing worn guide trays can let the lifters rotate out of position and damage the cam, so replacing the trays with the lifters is the safer route. This set includes trays so the whole assembly goes in fresh.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.