This PPR75 PVC fitting saver with a 3/4-inch head and 1/4-inch hex shaft drills out broken or stuck pipe stubs so the fitting body can be reused, and it runs in standard drill chucks and quick-change drivers.
This PVC fitting saver is a repair tool that bores out old pipe material left inside a fitting, letting you save the fitting instead of cutting it out. The 3/4-inch cutting head works the pipe wall while the 1/4-inch hex shaft locks into a drill for steady, controlled reaming. Aluminum construction keeps the tool light and rigid, and it is built for plumbers and repair techs handling PVC pipe fitting removal.
| Part Number(s) | PPR75 |
| Head Size | 3/4 inch (0.75 inch) |
| Shaft | 1/4-inch hex |
| Material | Aluminum |
Q: Can this fitting saver remove a fully broken pipe stub? A: Yes, the 3/4-inch head is designed to bore out old pipe material left in the fitting socket so the fitting can be reused. Work in short passes and keep the drill square to the fitting for a clean result.
Q: What drill do I need to run it? A: Any drill or driver that accepts a 1/4-inch hex shank will work. A variable-speed drill gives better control when reaming near the fitting wall.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.