This PVC pipe reamer with a 1/4-inch hex shaft reams and cleans plastic pipe ends so fittings seat fully and glue joints hold tight, and it works with standard drill chucks and quick-change drivers.
This PVC pipe reamer is a workshop tool that shaves burrs and excess socket depth from plastic pipe ends before solvent welding. The 1/4-inch hex shaft locks into a drill or driver, letting the reamer spin the pipe wall down to a clean, even taper for a snug fit. It suits plumbers, irrigation installers, and anyone assembling PVC or plastic pipe fittings who wants leak-free joints the first time.
| Part Number(s) | 1/2-inch PVC Pipe Reamer |
| Pipe Size | 1/2 inch |
| Shaft | 1/4-inch hex |
| Material | Plastic pipe reaming tool |
Q: Will this reamer fit my cordless drill? A: It uses a 1/4-inch hex shaft, which is the standard size for most cordless drills’ chucks and quick-change holders. If your drill accepts hex shank bits, this reamer should seat and spin normally.
Q: Does it work on pipe already installed in a trench? A: Yes, the compact head is designed to reach pipe ends in tight spots like trenches and wall chases. Spin the tool slowly and keep the reamer square to the pipe end for an even cut.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.