This baffled oil catch can reservoir tank with 10AN 2 port dual breather filter and 10FT hose captures oil mist and blow-by vapor before it reaches your intake, keeping the engine cleaner. The oil catch can reservoir tank combines a baffled 2 port design with a dual breather filter, and the included 10FT 10AN hose gives you enough length to route a clean, flexible setup.
This oil catch can reservoir tank is a compact canister that separates oil vapor from crankcase blow-by gases so the intake stays free of oil residue. The 2 port 10AN inlet and outlet with baffled internals and a dual breather filter make it a practical add-on for turbo, diesel, or high-mileage engines. It suits drivers and builders who want to cut carbon buildup and reduce oil consumption on a modified or heavy-use vehicle.
| Part Number(s) | 10AN |
| Ports | 2 port (inlet and outlet) |
| Filter | Dual breather filter |
| Hose | 10FT, 10AN |
| Design | Baffled |
Q: How often should the canister be drained? A: Check it every few hundred miles and drain once oil reaches about a third of the canister. On high blow-by engines, inspect more often.
Q: Does the dual breather filter replace a PCV valve? A: No, the dual breather filter vents pressure and traps mist, but the PCV system still controls crankcase flow. Route the 10AN ports with the 10FT hose to suit your setup.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.